Code No. : E259
Wing Span : 36.5 in / 930 mm
Wing Area : 346 sq in / 22.3 sq dm
Flying Weight : 26.5 oz / 750 g
Fuselage Length : 41.5 in / 1050 mm
Requires : 4-Channel radio w/ 4 micro servos, 20A brushless ESC, 3 cells 11.1V 2100 mAh Li-Po battery & charger - We can advise on what's needed!
Key Features
1. Aerobatic park flyer fabricated with top quality balsa and plywood
2.Covered with genuine heat shrink World Models' LighTex covering ( LighTex is available here on site!)
3. Strong wood structure and tough covering give the airframe the best wing loading available for this type of model.
4.Full house controls (ailerons, elevator, rudder and throttle) extend maneuvering limits.
NOTE this model comes with high performance direct drive outrunner motor Great value!!
For best results we recommend you use a Fixed 10 x 4 APC electric flight prop or similar. Below is a video by Lindsay Todd, this is Lindsay's model being flown at a fly in on the IOM. Lindsay says that this model is 'under sold' and we agree! Just look at the out 'of the box' perfomance .
Photographs below reproduced with kind permission of Dave Royds via the RCMF forum.
Photographs below reproduced with kind permission of Dave Royds
via the RCMF RC Forum. If you leave the site, just use your back browser to return
See this listing for a kit without motorThe Melting in the video was flown by Lindsay Todd with a perfomance World Models Outrunner!