ServoShop Checkout |  Home
Futaba  |  Hitec  |  JR  |  Tower Pro  |  PowerHD  |  New Power  |  Savox  |  Contact Us  |  Latest News  |  SecurityMetrics Credit Card Safe
Search



Selected New Items
Last 30 Days

Last 90 Days

Last 365 Days

Latest Sales Items



Similar Products



TWM SV3031B Mini Servo 780mm Cable

All servos on ServoShop come with manufacturers fittings unless otherwise stated.

This servo is only available at Steve Webb Models and Direct on ServoShop

This is a quality servo made by The World Models and used in many of thier designs. Note that this servo has a long lead 780mm with Fut/JR/Hitec/Spektrum style connector so that when the servo is used on the wings of model aeroplanes it does not need an extension lead. This saves weight and money and should be factored in when you are deciding to buy a servo on costs alone. If you need a shorter lead on this servo, see the listing directly below this for the A Servo that has a shorter lead.

This is a servo that is used in many of the Pre Assembled The Wings Maker Models and is recommended by The Wings Maker Modelsfor certian models.

It's a high class quality Mini Servo that will find a use in other manufacturers models as it comes with extra long leads for wing installation or where a servo is installed far from the RX

Code No SV3031B

Specification

  • Size 28.5x13.3x30.6mm
  • Package 1 set/pkg
  • Description - Mini Servo with plastic gears for general use.
  • Speed:
    • 0.16 sec / 60 @4.8V
    • 0.12 sec / 60 @6.0V
  • Torque:
    • 2.3 kg.cm @4.8V
    • 2.5 kg.cm @6.0V
  • Cable Length: 780mm
  • Weight: 20g (with wire)
picture

Price

£8.99 Each
4 for £34.00
8 for £66.00
(inc.VAT)

picture


Customers Also Considered



The Wings Maker Panther Pre Assembled REF GE032P

The Wings Maker DF-032P Panther (combo - Pre Assembled) - Delta manufactured from tough EPO Foam

Nigel Hawes from RCM&E - Probably one of the best value EDF sport models on the market today

This is a superb model, that is easy to fly and launch. Being a delta it's easy to fly slowly, but equally at home when you open the taps.

A full power dive is great fun, as it goes like the proverbial bat out of hell when you want it to. You will need to switch to 'low rates' on such occasions, as it can be a little twitchy at really high speed.

Can be hand launched or use the included dolly (though you may want to put some bigger wheels on if flying off grass)

The manufacturer recommends using a 30 Amp ESC, however the motor/fan can draw in excess of 37 Amps with a good battery, so we recommend using a 40 to 50 Amp ESC.

Warning if you watch the videos you will want one!

  • The Wings Maker's electric jet series.
  • Hot aerobatics at high speed and relaxing flying at low speed.
  • Lightweight and strong EPO foam provides structural strength and rigidity.
  • Pre-Assembled Combo Version - Servos, motor and Fan unit pre-installed
  • Code No. : GE032P
  • Wing Span : 33 in / 850 mm
  • Wing Area : 299 sq in / 19.3 sq dm
  • Flying Weight : 24 oz / 680 g
  • Fuselage Length : 26.5 in / 675 mm

If you need extra servos or spare servos for Wings Maker - then click the link to take you to the Wings Maker Servos

The manufacturer recommends using epoxy glue to put this kit together. However from our own experience we did not find epoxy the best type of glue for EPO and we recommend a cyano glue such as Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

picture

Price

£109.99 Each

(inc.VAT)

picture



The Wings Maker J10B Fighter Combo Set Ref GE034C

J-10B Fighter (Combo) - This is the Combo Version.

For a Ready Assembled Combo and for a J10 Kit Only (No Fan or Motor) see seperate listings.

The videos below show the J10 flying in various conditions. In one video you will get to see how the J10 handles the wind and in the other videos there's some great general club flying and J10 chases, Warning if you watch the videos you will want one!

If you need extra servos or spare servos for Wings Maker - then click the link to take you to the Wings Maker Servos

  • 'Receiver ready combo set' Version
  • The Wings Maker's electric jet series
  • Hot aerobatics at high speed and scaled flying at low speed
  • Lightweight and strong EPO foam provides structural strength and rigidity
  • Code No. : GE034C
  • Wing Span : 28.7 in / 730 mm
  • Wing Area : 310 sq in / 20 sq dm
  • Flying Weight : 28.5 oz / 805 g
  • Fuselage Length : 42.7 in / 1085 mm
  • Requires : 4-channel "mixing radio" (elevator and aileron), 40A (burst 50A) brushless ESC and 3 cells 11.1V 20C 2100mAh battery and charger

ESC Specifications - Please Note

Although the manufacturer recommends a 30/35 Amp ESC (when running a 3-cell setup) for this aircraft, we have found that the fan unit will draw over 37 Amps with a good battery. Following many flights with our own models we would recommend a 40 to 50 amp ESC on a 3 Cell Set Up and if using the 4 Cell Turbo Motor and TWM Fan we recommend a 60 to 70 amp ESC.

As with all final fix motor installations you should check the ESC used is adequate for your individual set up

Although the manufacturer recommends using epoxy to put the kit together, from our own experience we did not find this type of glue to be particularly suitable for EPO and we recommend Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

picture

Price

£99.99 Each

(inc.VAT)

picture
 
Privacy statement Terms & conditions © Steve Webb Models Limited 2018. Postage & packing Contact us