This simple to use Battery Load Tester is designed to connect to the charge lead from the receiver switch, or an external charge socket, to check your models NiCd or NiMH battery condition under a similar load as when it is in the air.
Firstly, plug the Battery Load Tester into the charge lead or external charge socket.
Move the switch on the front of the unit to your required voltage (4.8V or 6.0v) and then press the button on the Battery Load Tester, which will apply a load of 500mA (4.8V) or 600mA (6V) to the battery.
Depending on the run time / flight time, it should be safe to operate as long as only the green LEDs are lit, if any other colours light up you should recharge your battery pack before operating the model.
If you are ordering off line or calling into the Steve Webb Model shop, be sure to quote the deals you have seen on the web site or you may be charged differently! If you order on line you automatically get the prices. The same price s are available in store - but do quote this listing