Overview

The power of Hitec’s D-Series servos continues with the introduction of the next Premium Class trio: the D930SW, D954SW and D955TW. As with our entire “D” line, these technologically-advanced servos are powered by our 32-bit MCU (Micro-controller Unit) and 12-bit ADC (Analogue to Digital Converter) industrial science and possess Smart Sense engineering with rapid, high resolution response. Their unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. Built with incredibly durable steel gears, the D930SW is the perfect upgrade from our popular HS-8330SH servo. Advancing servo technology and providing superior engineering has always been Hitec’s mission and that continues today as we expand our outstanding D-Series product line.

Features

• Programmable PWM Digital Amplifier
• 32-Bit MCU with 12-Bit ADC Circuitry
• 4096 Resolution
• 1M Cycle Long Life Potentiometer
• Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
• Dual Ball Bearing Supported Output Shaft
• 25-Tooth Output Spline
• Coreless Metal Brush Motors
• Nylon Reinforced Plastic Upper and Lower Case
• Diamond Cut Aluminium Heat Sink Centre Case
• Dust Resistant and Splash Proof Case

Programmable Functions

• End Point Adjustments
• Direction
• Fail Safe
• Dead Band
• Speed (Slower)
• Soft Start Rate
• Overload Protection
• Data Save / Load
• Program Reset

Accessories

• 3 Steel Alloy Gears Set | Link |
• Metal / Karbonite 1st Gear Set | Link |
• Plastic / Aluminium Case Set | Link |
• Applicable Horns & Screws

Specifications

Performance Specifications

• Operating Voltage Range (Volts DC): 4.8V ~ 7.4V
• Speed (Second @ 60°): 0.11 ~ 0.07
• Maximum Torque Range oz. / in.: 112 ~ 182
• Maximum Torque Range kg. / cm.: 8.0 ~ 13.0
• Current Draw at Idle: 30 mA
• No Load Operating Current Draw: 500 mA
• Stall Current Draw: 5,200 mA
• Dead Band Width: 1 µs

Physical Specifications

• Dimensions (Inches): 1.57 x 0.78 x 1.46
• Dimensions (Metric): 40.0 x 20.0 x 37.0
• Weight (Ounces): 2.33
• Weight (Gram): 66.0
• Circuit Type: 32bit Programmable Digital
• Motor Type: Coreless Metal Brush
• Gear Material: MK 1st Gear & 3 Steel Alloy Gears
• Bearing Type: Dual Ball Bearing
• Output Shaft (type / Ømm): H25T
• Case Material: Plastic / Aluminium
• Dust / Water Resistance: Splash Proof
• Connector Gauge (AWG) / Strand Count: 20 / 80