ServoShop
Checkout |  Home


Futaba  |  Hitec  |  MacGregor  |  Tower Pro  |  PowerHD  |  New Power  |  Savox  |  Spektrum  |  Contact Us  |  Latest News  |  SecurityMetrics Credit Card Safe
Secured by PayPal


Similar Products



Hitec HS 5685MH 7.4 v Servo - Hi Torque

All servos on ServoShop come with manufacturers fittings unless otherwise stated.

Please note: The colour of servo arms supplied may vary from that shown in the picture(s).

Overview

The HS-5685MH High Torque HV Metal Gear servo was designed to run on a 2-cell 7.4V LiPo battery to give you extra torque and speed. Featuring a heavy-duty metal gear train and our exclusive programmable digital circuit for reliable, durable performance, these servos can be used in a wide range of applications.

Our affordable digital sport servos are the perfect companion for 1/10th to 1/8th scale on- and off-road vehicles, as well as larger sport helicopters and large scale aerobatic aircraft up to 25-percent.

Features

  • Programmable Digital Circuit
  • Heavy-Duty Metal Gear Train (MK first gear)
  • 7.4V Optimized Motor
  • Dual Ball Bearing Supported Output Shaft

Programmable Features

  • Dead Band Width
  • Direction of Rotation
  • Speed of Rotation (slower)
  • End Points
  • Neutral Points
  • Fail Safe On/Off
  • Fail Safe Point

Specifications

  • Motor Type: 3 Pole Ferrite
  • Bearing Type: Dual Ball Bearing
  • Speed Sec/60° (6.0V/7.4V): 0.20 / 0.17
  • Torque kg.cm (6.0V/7.4V): 11.3 / 12.9
  • Size in Millimetres: 40.6 x 19.8 x 37.8 mm
  • Weight g: 60g
picture

Price

£32.99 Each
4 for £123.96
(inc.VAT)

picture


Customers Also Considered



Hitec HS-5055 MG Digital

All servos on ServoShop come with manufacturers fittings unless otherwise stated.

Please note: The colour of servo arms supplied may vary from that shown in the picture(s).

Overview

Since its introduction, the HS-55 has set the standard for affordable performance, offering precision components that have been engineered to provide long lasting trouble free service!

Enter the new HS-5055MG digital, metal geared version... with this new servo Hitec takes ultra micro performance to the next level without breaking the bank. The new HS-5055MG is a perfect choice for ” smaller” high performance electric helicopters, aircraft and sail planes.

Spare Parts for the Hitec Servo Range

If you cannot see the spares you require - please contact us via the Contact Us Page

Features

  • Digital Circuit for Increased Performance and Holding Power
  • Smooth Coreless Motor
  • Rugged Metal Gears
  • Standard Programmable Digital Circuit
  • Economical, Feather, Digital Servo

Specifications

  • Motor Type: Coreless
  • Bearing Type: None
  • Speed Sec/60° (4.8V/6.0V): 0.20 / 0.17
  • Torque kg.cm (4.8V/6.0V): 1.2 / 1.5
  • Size in Millimetres: 22.61 x 11.43 x 23.88
  • Weight grams: 9.36
picture

Price

£18.99 Each
4 for £71.96
8 for £119.92
(inc.VAT)

picture



Hitec HS-7980TH - 7.4 volt servo

All servos on ServoShop come with manufacturers fittings unless otherwise stated.

Please note: The colour of servo arms supplied may vary from that shown in the picture(s).

Overview

The "Monster Torque" HS-7980TH is designed to operate on a two cell LiPo Pack. Featuring Hitec's newest high resolution "G2.5" 12 bit generation programmable digital circuit and our indestructible Titanium gears, The HS-7980TH has the performance and durability you've come to expect from a Hitec servo. Other features in the HS-7980TH include a 7.4V optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by axial brass bushing.

Applications for the HS-7980TH include high performance Giant Scale Aircraft, Truggies and Buggies, Fast Power boats, the largest aircraft, monster trucks or anywhere else you can use 600+ ounce inches of torque.

Features

  • G2.5 12 bit Digital Programmable Circuit
  • Titanium Gear Train (MK first gear)
  • Ultra Performance Coreless Motor
  • Integrated Heatsink Case
  • (8) O-Rings for Water/Dust/Fuel protection
  • Dual Ball Bearing Supported Output Shaft
  • 10% larger than a HS-7955TG

Programmable Features

  • Dead Band Width
  • Direction of Rotation
  • Speed of Rotation (slower)
  • End Points
  • Neutral Points
  • Fail Safe On/Off
  • Fail Safe Point
  • Overload Protection (default is off)

Specifications

  • Motor Type: Coreless
  • Bearing Type: Dual Ball Bearing
  • Speed sec/60°(6.0V/7.4V): 0.20 / 0.17
  • Torque kg.cm (6.0V/7.4V): 38.0 / 46.0
  • Size in Millimeters: 43.69 x 22.35 x 39.88
  • Weight g.: 76.54
picture

Price

£129.99 Each
2 for £247.98
(inc.VAT)

picture
 
Privacy Policy Terms & conditions © Steve Webb Models Limited 2019. Postage & packing Contact us