ServoShop
Checkout |  Home


Futaba  |  Hitec  |  MacGregor  |  Tower Pro  |  PowerHD  |  New Power  |  Savox  |  Spektrum  |  Contact Us  |  Latest News  |  SecurityMetrics Credit Card Safe
Secured by PayPal


Similar Products






Hitec HPP21 Servo- PC Programmer

PC Programmer for Hitec Digital Servos

PC Based Digital Servo Programmer and Tester

Programs all Hitec Digital Servo Parameters

Tests all Brands of Servos

Free Downloadable Software

USB PC Connection

HPP-21 HITEC digital servo programmer and ďall brandĒservo tester.

The HPP-21 will allow the user to easily check any servo brandís servo performance by using servo test functions and set most of the programmable parameters of all HITEC digital servo types as noted in the following statement;

The HPP-21 will program the following features of these HITEC digital servos:

- All HS-7XXX G2 servos: Fully programmable, including OLP Rate(Overload Protection Rate),and High Resolution adjustment function - Some HS-5XXX type servos: Fully programmable Feather and Micro Digital servos, including OLP Rate;

Excluding High Resolution adjustment function (HS-5055, 5056, 5065, 5082, 5085)- Other HS-5XXX type servos: All features are programmable except OLP Rate and High Resolutionadjustment functions

NOTE: All HITEC gyro and analog servos are NOT programmable..

Spare Parts for the Hitec Servo Range
If you cannot see the spares you require - please contact us via the Contact Us Page
picture

Price

£18.99 Each
 
(inc.VAT)

 
  
 


Customers Also Considered



Hitec HS-7954SH High Voltage, High Torque, Coreless Digital Servo

All servos on ServoShop come with manufacturers fittings unless otherwise stated.

Please note: The colour of servo arms supplied may vary from that shown in the picture(s).

Overview

The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market. Based on the ultra popular HS-7955TG, the HS-7954SH has the added benefit of our high voltage coreless motor. With 403 inch ounce of torque at 7.4 volts, the HS-7954SH is fast too with a 0.12 second transit time when operating on a 2 cell LiPo pack. The HS-7954SH harnesses all this power by utilizing a heavy duty case that incorporates an aluminium heat sink, hardened steel gears, and two strong steel gear pins nested in brass axial bushings. Put it all together and you get one tough high voltage servo at a price that can't be beat.

Features

  • G2 Digital Circuit
  • HV Coreless Motor
  • Dual Ball Bearing Supported Output Shaft
  • Steel Gear Train (MK first gear)

Programmable Features

  • Dead Band Width
  • Direction of Rotation
  • Speed of Rotation (slower)
  • End Points
  • Neutral Points
  • Fail Safe On/Off
  • Fail Safe Point
  • Resolution (default is high resolution)
  • Overload Protection (default is off)

Specifications

  • Motor Type: Coreless
  • Bearing Type: Dual Ball Bearing
  • Speed (6.0V/7.4V): 0.15 / 0.12
  • Torque kg.cm (6.0V/7.4V): 24.0 / 29.0
  • Size in Millimetres: 39.88 x 19.81 x 36.83
  • Weight g.: 65.20
picture

Price

£79.99 Each
2 for £153.98
(inc.VAT)

picture



Hitec HS-5085MG Metal Gear Micro Digital Servo

All servos on ServoShop come with manufacturers fittings unless otherwise stated.

Please note: The colour of servo arms supplied may vary from that shown in the picture(s).

Overview

A digital version of one of Hitecís most popular mini servos the HS-5085MG offers excellent centering, resolution and durability for those looking to save weight without sacrificing performance. A popular servo for smaller airplanes, heliís, boats, cars and trucks, the HS-5085MG offers a fine balance between speed and torque.

Spare Parts for the Hitec Servo Range

If you cannot see the spares you require - please contact us via the Contact Us Page

Features

  • Standard Servo Performance from a Micro Servo
  • Rugged Metal Gears
  • Ball Bearing-Supported Output Shaft
  • Standard Programmable Digital Circuit
  • Stronger Holding Power than the Analog Version

Specifications

  • Motor Type: 3 Pole
  • Bearing Type: Top Ball Bearing
  • Speed Sec/60į (4.8V/6.0V): 0.17 / 0.13
  • Torque kg.cm (4.8V/6.0V): 3.6 / 4.3
  • Size in Millimetres: 28.96 x 12.95 x 29.97
  • Weight grams: 21.83
picture

Price

£25.99 Each

(inc.VAT)

picture
 
Privacy Policy Terms & conditions © Steve Webb Models Limited 2019. Postage & packing Contact us