A full sheet of Aero Depron 3 mm Foam measures 3mm x 1250 mm x 800 and callers to the Steve Webb Model shop can pick up a single sheet. Mail order we have to send a minimum of 5 sheets and these are cut into half sizes for packing purposes. As standard, each single sheet is cut to 2 pieces sized 1250mm x 400mm, if you require a different or alternative measurement, please contact us or note this in the special instructions area of the checkout.
Please note the sheets are priced in singles with price breaks for FIVE and TEN sheets (Over Five Sheets of can be sent as full sheets if requested, but may incur an additional postal charge due to the size of the box). If you order only ONE sheet Mail Order we will upgrade your order to the correct minimum quantity of five sheets Mail Order.
The NEW light weight Depron modelling foam. The all new Aero Depron is a genuine Depron product manufactured 15% to 20% lighter than Classic Depron. Aero Depron is slightly more flexible and bends and shapes as easy , if not easier than classic Depron.
Aero Depron will need more localised re-enforcement than standard Depron and can be mixed and matched with regular Depron , Balsa or Carbon to make lightweight model aeroplanes that seemed impossible not so long ago!
Aero 9mm Depron as well as 6 mm Depron are often used in the construction of large model aeroplanes and boats where weight loss is needed over conventional materials. Depron makes for superb composites when mixes and matched with wood and carbon.
- Grey Depron Specification PDF
- Aero Depron Specification PDF
- White Depron Specification PDF
Depron for Modelling
Originally used as containers for fast-food and flooring insulation, Depron has been established as the perfect material for producing models, especially model aircraft.
What makes Depron so good?
Unlike materials such as balsa, Depron modelling foam does not have a grain and therefore does not split. Each sheet is manufactured identically so weight and density are consistent from sheet-to-sheet, for when balance and performance are crucial. Depron is lightweight, as light as 28kg/m³, whilst maintaining incredible strength and because of the structure of the foam, Depron cuts very easily and cleanly, making it effortless to work.
There are two main types of Depron which are recommended for modelling, Depron and Depron Aero - Both are available on site
The NEW light weight Depron modelling foam. More than 15% lighter than Classic Depron
- Genuine Depron Aero
- 3mm, 6mm & 9mm Thickness
- Lower Density than Classic Depron
- Finer Cell Structure
- Less Brittle
- No Surface Skin, Lower Risk of Creasing
- White Finish
- Smoother Surface Finish
For detailed information, please see our technical page in PDF format - Click Here
|Material:||Extruded Polystyrene Foam Sheets
|Adhesive Type:||Solvent Free/Foam Friendly