ServoShop Checkout |  Home
Futaba  |  Hitec  |  JR  |  Tower Pro  |  PowerHD  |  New Power  |  Savox  |  Contact Us  |  Latest News  |  SecurityMetrics Credit Card Safe
Search



Selected New Items
Last 30 Days

Last 90 Days

Last 365 Days

Latest Sales Items



Similar Products



The Wings Maker X-35 Fighter Pre Ass Kit Ref : GE041P

The X-35 Fighter is a real looker and is now available at Steve Webb Models and ServoShop!

A new stable mate for the J10, this is sure to prove popular. Sharing similar characteristics as the Wings Maker J10, the X35 has good slow speed handling while also maintaining the ability for a good turn of speed when needed. With scope for modifications such as after market thrust vectoring modifications and the strong EPO construction the X35 is sure to please experts, club flyers and EDF tyro modellers alike

Although the manufacturer recommends a 30/35 Amp ESC for this aircraft, we have found that depending on the battery used and flying conditions it is difficult to adequately cool an ESC of this rating. Following many flights with our own models we would recommend a 40 to 50 amp ESC on a 3 Cell Set Up and if using the 4 Cell Turbo Motor and TWM Fan we recommend a 60 to 70 amp ESC.

As with all final fix motor installations you should check the ESC used is adequate for your individual set up.

  • The Wings Maker's electric jet series.
  • Hot aerobatics at high speed and scaled flying at low speed.
  • Lightweight and strong EPO foam provides structural strength and rigidity.
  • Code No. : GE041P
  • Wing Span : 29 in / 740 mm
  • Wing Area : 310 sq in / 20 sq dm
  • Flying Weight : 29 oz / 820 g
  • Fuselage Length : 40.5 in / 1030 mm
  • Requires : 5-channel mixing radio.

EPO is notorious for being difficult to get a good glued joint. From our own experience we recommend Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

picture

Price

£99.99 Each

(inc.VAT)

picture



The Wings Maker The Handyman Pre Assembled Ref :GE039P

No time to assemble? Want to get in the air in minimum time? Then this is the one for you. A pre assembled Handy Man now that's 'handy'

Just add a receiver, ESC and battery and you are Ready to Fly.

Symmetrical aerofoil wings with large control surfaces perform 3D manoeuvres at pilots' command.

Those pilots that are a fan of the TWM Melting will warm to this model as it takes 3D to the next level.




The video above features Graham Roscoe!
  • The Durable foam construction takes care of unintentional touch downs. Although the model is not indestructible it is more resilient than a balsa airframe.
  • The motor has been selected to give optimum performance; the 'Pre-assembled Combo Set' version comes with factory installed Brushless Outrunner Motor 28/30 (KM0283010), Propeller Adaptor (HW2340100) and 4 Micro Servos (SV2031). Some pilots prefer to fit fixed props for improved performance, but the folding prop is good if flying from rough grass.
  • 'Pre-assembled Combo Set Version'
  • Factory installed 4 micro servos and brushless outrunner motor.
  • Code No. : GM039P
  • Wing Span : 36.5 in / 930 mm
  • Wing Area : 346 sq.in / 22.3 sq.dm
  • Flying Weight : 19-23 oz / 540-650 g
  • Fuselage Length : 41.5 in / 1055 mm
  • Requires : 4-channel radio, 30A brushless ESC, 2 cells 7.4V 15C 1300mAh (Indoor flying) to 3 cells 11.1V 15C 1800mAh (Outdoor flying) Li-Po battery and charge

The manufacturer recommends using epoxy glue to put this kit together. However from our own experience we did not find epoxy the best type of glue for EPO and we recommend a cyano glue such as Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

picture

Price

£139.99 Each
 
(inc.VAT)

picture


Customers Also Considered



The Wings Maker Panther Pre Assembled REF GE032P

The Wings Maker DF-032P Panther (combo - Pre Assembled) - Delta manufactured from tough EPO Foam

Nigel Hawes from RCM&E - Probably one of the best value EDF sport models on the market today

This is a superb model, that is easy to fly and launch. Being a delta it's easy to fly slowly, but equally at home when you open the taps.

A full power dive is great fun, as it goes like the proverbial bat out of hell when you want it to. You will need to switch to 'low rates' on such occasions, as it can be a little twitchy at really high speed.

Can be hand launched or use the included dolly (though you may want to put some bigger wheels on if flying off grass)

The manufacturer recommends using a 30 Amp ESC, however the motor/fan can draw in excess of 37 Amps with a good battery, so we recommend using a 40 to 50 Amp ESC.

Warning if you watch the videos you will want one!

  • The Wings Maker's electric jet series.
  • Hot aerobatics at high speed and relaxing flying at low speed.
  • Lightweight and strong EPO foam provides structural strength and rigidity.
  • Pre-Assembled Combo Version - Servos, motor and Fan unit pre-installed
  • Code No. : GE032P
  • Wing Span : 33 in / 850 mm
  • Wing Area : 299 sq in / 19.3 sq dm
  • Flying Weight : 24 oz / 680 g
  • Fuselage Length : 26.5 in / 675 mm

If you need extra servos or spare servos for Wings Maker - then click the link to take you to the Wings Maker Servos

The manufacturer recommends using epoxy glue to put this kit together. However from our own experience we did not find epoxy the best type of glue for EPO and we recommend a cyano glue such as Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

picture

Price

£109.99 Each

(inc.VAT)

picture



The Wings Maker The Handyman Kit Ref :GE039

The Handyman EP looks very much like and EPO version of

the World Models Melting - also available at Steve Webb Models and ServoShop.

Code No. : GE039

Wing Span : 36.5 in / 930 mm

Wing Area : 346 sq.in / 22.3 sq.dm

Flying Weight : 19-23 oz / 540-650 g

Fuselage Length : 41.5 in / 1055 mm

Requires : 4-channel radio, 4 micro servos, brushless outrunner motor, prop. adaptor, 20A brushless ESC, 2 cells 7.4V 15C 1300mAh (Indoor flying) to 3 cells 11.1V 15C 1800mAh (Outdoor flying) Li-Po battery and charger.

A Symmetrical airfoil wings with large control surfaces perform 3D maneuvers at pilots' command.

Durable foam construction takes care of un-intentional touch downs.

Powerful outrunner motor (optional) enhance unlimited vertical aerobatic performance.


The video above features Graham Rolling Roscoe!

Photos by Lindsay Todd and Graham Roscoe.

Glues

EPO foam (Expanded Poly Olefin) is known by many trade names. For example Parkzone's Z Foam and the Multiplex's Elapor models.

EPO is notorious for being difficult to get a good glued joint. From our own experience we did not find 5 minute epoxy the best type of glue for EPO and we recommend Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Slower types of Epoxy can also work if the surfaces being glued are roughhed up to help the glue 'key' the joint. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

The Handyman is proving to be so popular with model flying clubs and modellers in general. It has been found to be ideal model for Club Aerobatic events or 'One Model' events. We here at SWM/ServoShop are committed to supporting and promoting this hobby as much as we possibly can and so we are making available a Club Deal rate of 49.99 per Handyman kit when purchased in fives or over. Not only is the model discounted further, but carriage will also be more economic as you hit the FREE carriage band (in the U.K).

We are offering a similar type of deal on the Sunrise models

If you need extra servos or spare servos for Wings Maker - then click the link to take you to the Wings Maker Servos

picture

Price

£59.99 Each

(inc.VAT)

picture
 
Privacy statement Terms & conditions © Steve Webb Models Limited 2017. Postage & packing Contact us