ServoShop Checkout |  Home
Futaba  |  Hitec  |  JR  |  Tower Pro  |  PowerHD  |  New Power  |  Savox  |  Contact Us  |  Latest News  |  SecurityMetrics Credit Card Safe


Similar Products



TWM SV3031B Mini Servo 780mm Cable

This servo is only available at Steve Webb Models and Direct on ServoShop

This is a quality servo made by The World Models and used in many of thier designs. Note that this servo has a long lead 780mm with Fut/JR/Hitec/Spektrum style connector so that when the servo is used on the wings of model aeroplanes it does not need an extension lead. This saves weight and money and should be factored in when you are deciding to buy a servo on costs alone. If you need a shorter lead on this servo, see the listing directly below this for the A Servo that has a shorter lead.

This is a servo that is used in many of the Pre Assembled The Wings Maker Models and is recommended by The Wings Maker Modelsfor certian models.

It's a high class quality Mini Servo that will find a use in other manufacturers models as it comes with extra long leads for wing installation or where a servo is installed far from the RX

Code No SV3031B

Specification

  • Size 28.5x13.3x30.6mm
  • Package 1 set/pkg
  • Description -Mini Servo with plastic gears for general use.
  • Speed: 0.16 sec / 60° @4.8V
  • 0.12 sec / 60° @6.0V - Torque:
  • 2.3 kg.cm @4.8V
  • 2.5 kg.cm @6.0V
  • -Cable Length:780mm
  • -Weight:20g (with wire)
picture

Price

£8.99 Each
4 for £34.00
8 for £66.00
(inc.VAT)

picture



TWM SV2031 Micro Servo Cable 125mm

This servo is only available at Steve Webb Models and Direct on ServoShop

This is a quality servo made by The World Models and used in many of thier designs. The Wings Maker Series uses this servo mainly for ailerons - one in each wing. It's a servo we have used ourselves with no problems, but as with any micro servo this unit should only be operated electronically by the radio as turning the servo by hand can strip gears.

Specification

  • Size: 22.4 x 11.4 x 20.0 mm

Package: 1 set/pkg

  • Speed: 0.1 sec / 60° @4.8V
  • Torque: 1.6 kg.cm / 22.2 oz-in @4.8V
  • Weight: 7.8 g / 0.28 oz
  • Cable Length: 125 mm

Please note you can save money in the quantity deals

picture

Price

£7.99 Each
4 for £27.96
8 for £52.00
(inc.VAT)

picture


Customers Also Considered



The Wings Maker Panther Combo REF GE032C

The Wings Maker DF-032C Panther (combo NOT Pre-Assembled) - Delta manufactured from tough EPO Foam

Nigel Hawes from RCM&E - Probably one of the best value EDF sport models on the market today

This is a superb model, that is easy to fly and launch. Being a delta it's easy to fly slowly, but equally at home when you open the taps.

A full power dive is great fun, as it goes like the proverbial bat out of hell when you want it to. You will need to switch to 'low rates' on such occasions, as it can be a little twitchy at really high speed.

Can be hand launched or use the included dolly (though you may want to put some bigger wheels on if flying off grass)

The manufacturer recommends using a 30 Amp ESC, however the motor/fan can draw in excess of 37 Amps with a good battery, so we recommend using a 40 to 50 Amp ESC.

Warning if you watch the videos you will want one!

  • The Wings Maker's electric jet series.
  • Hot aerobatics at high speed and relaxing flying at low speed.
  • Lightweight and strong EPO foam provides structural strength and rigidity.
  • 'Combo' Version - includes servos, motor & fan unit
  • Code No. : GE032C
  • Wing Span : 33 in / 850 mm
  • Wing Area : 299 sq in / 19.3 sq dm
  • Flying Weight : 24 oz / 680 g
  • Fuselage Length : 26.5 in / 675 mm

If you need extra servos or spare servos for Wings Maker - then click the link to take you to the Wings Maker Servos

The manufacturer recommends using epoxy glue to put this kit together. However from our own experience we did not find epoxy the best type of glue for EPO and we recommend a cyano glue such as Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

picture

Price

£89.99 Each

(inc.VAT)

picture



The Wings Maker The Handyman Pre Assembled Ref :GE039P

No time to assemble? Want to get in the air in minimum time? Then this is the one for you. A pre assembled Handy Man now that's 'handy'

Just add a receiver, ESC and battery and you are Ready to Fly.

Symmetrical aerofoil wings with large control surfaces perform 3D manoeuvres at pilots' command.

Those pilots that are a fan of the TWM Melting will warm to this model as it takes 3D to the next level.




The video above features Graham Roscoe!
  • The Durable foam construction takes care of unintentional touch downs. Although the model is not indestructible it is more resilient than a balsa airframe.
  • The motor has been selected to give optimum performance; the 'Pre-assembled Combo Set' version comes with factory installed Brushless Outrunner Motor 28/30 (KM0283010), Propeller Adaptor (HW2340100) and 4 Micro Servos (SV2031). Some pilots prefer to fit fixed props for improved performance, but the folding prop is good if flying from rough grass.
  • 'Pre-assembled Combo Set Version'
  • Factory installed 4 micro servos and brushless outrunner motor.
  • Code No. : GM039P
  • Wing Span : 36.5 in / 930 mm
  • Wing Area : 346 sq.in / 22.3 sq.dm
  • Flying Weight : 19-23 oz / 540-650 g
  • Fuselage Length : 41.5 in / 1055 mm
  • Requires : 4-channel radio, 30A brushless ESC, 2 cells 7.4V 15C 1300mAh (Indoor flying) to 3 cells 11.1V 15C 1800mAh (Outdoor flying) Li-Po battery and charge

The manufacturer recommends using epoxy glue to put this kit together. However from our own experience we did not find epoxy the best type of glue for EPO and we recommend a cyano glue such as Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

picture

Price

£139.99 Each
 
(inc.VAT)

picture
 
Privacy statement Terms & conditions © Steve Webb Models Limited 2017. Postage & packing Contact us