ServoShop Checkout |  Home
Futaba  |  Hitec  |  JR  |  Tower Pro  |  PowerHD  |  New Power  |  Savox  |  Contact Us  |  Latest News  |  SecurityMetrics Credit Card Safe


Customers Also Considered



The Wings Maker X-35 Fighter Pre Ass Kit Ref : GE041P

The X-35 Fighter is a real looker and is now available at Steve Webb Models and ServoShop!

A new stable mate for the J10, this is sure to prove popular. Sharing similar characteristics as the Wings Maker J10, the X35 has good slow speed handling while also maintaining the ability for a good turn of speed when needed. With scope for modifications such as after market thrust vectoring modifications and the strong EPO construction the X35 is sure to please experts, club flyers and EDF tyro modellers alike

Although the manufacturer recommends a 30/35 Amp ESC for this aircraft, we have found that depending on the battery used and flying conditions it is difficult to adequately cool an ESC of this rating. Following many flights with our own models we would recommend a 40 to 50 amp ESC on a 3 Cell Set Up and if using the 4 Cell Turbo Motor and TWM Fan we recommend a 60 to 70 amp ESC.

As with all final fix motor installations you should check the ESC used is adequate for your individual set up.

  • The Wings Maker's electric jet series.
  • Hot aerobatics at high speed and scaled flying at low speed.
  • Lightweight and strong EPO foam provides structural strength and rigidity.
  • Code No. : GE041P
  • Wing Span : 29 in / 740 mm
  • Wing Area : 310 sq in / 20 sq dm
  • Flying Weight : 29 oz / 820 g
  • Fuselage Length : 40.5 in / 1030 mm
  • Requires : 5-channel mixing radio.

EPO is notorious for being difficult to get a good glued joint. From our own experience we recommend Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.

picture

Price

£99.99 Each

(inc.VAT)

picture



 
Privacy statement Terms & conditions © Steve Webb Models Limited 2017. Postage & packing Contact us