ServoShop Checkout |  Home
Futaba  |  Hitec  |  JR  |  Tower Pro  |  PowerHD  |  Spektrum  |  Savox  |  Contact Us  |  Latest News  |  SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

Similar Products

Multiplex Nano S Servo

The Nano S continues the Multiplex tradition of affordable performance and quality.

Featuring Multiplex precision components that have been engineered to provide long lastingtrouble free service.

The Nano S Micro Servo is the perfect choice for any micro application from indoor R/C and hand launch gliders, to ultra small electric Park and Yard flyers.

One of the best selling servos available on ServoShop. This servo has a very similar performance to the HS 55 and features the same mounting dimensions.

At ServoShop prices you can’t go wrong!

All servos on ServoShop come with manufacturers fittings unless otherwise stated

So don't forget - If you are replacing a Hitec HS 55 the Muliplex Nano S is a servo worth a further look at as it is the same physical size as the Hitec HS 55



£13.99 Each


Dimensions (mm): 12.0 x 23.0 x 24.0
Weight (grams): 8.0
Speed (sec): 0.17
Torque ( 1.20
Ball Raced: No

Hitec HS-65MG+ Mighty Feather MG BB

Hitec has released an all new micro class servo, the HS-65MG with strong, shock resistant metal gears.

The HS-65MG is one of Hitecís most powerful servoís in the micro class, with over 1.9kg of power at 6 volts.

Created for higher performance micro helicopters, electric park flyers, & 1/18 scale cars, this servo feature a top ball-bearing for long life and positive centering

Ensure adequet vibration dampening in I.C power models as excess vibration can wear the metal gears

As usual probably the best price in the U.K - check it out!

Best prices here on ServoShop, please check out the Bulk Deals.

Spare Parts for the Hitec Servo Range
If you cannot see the spares you require - please contact us via the Contact Us Page

Please note these HS 65 MG servos are genuine Hitec servos and are supplied loose with fittings at a very competitive price. There may be occasions when they are supplied boxed.


£18.99 Each
4 for £74.00
8 for £143.92


Dimensions (mm): 12.0 x 24.0 x 24.0
Weight (grams): 11.2
Speed (sec): 0.13
Torque ( 1.90
Ball Raced: Yes

Customers Also Considered

Falcon Breeze Block with DSP/ Fail Safe 35 mhz

35MHz or 72MHz FM RX with 2 Falcon Mk III servos. Complete with CNC cut ply mount.

Falcon Breeze Block now with DSP & Fail Safe

The Digital Signal Processing function ensures only clean signals reach the servos. If after approx. 1-2 seconds no good signals are received, the fail safe function will be activated. The Fail Safe function remembers the Tx stick positions on power up eg, throttle closed, controls neutral. Tx on first then switch on Rx. To test fail safe, throttle up , control sticks full travel, swtich off Tx, neutral controls, motor cuts.

Designed to make installation easy for micro radio controlled models - Includes 2 Falcon digital servos and the New Falcon Receiver all on one board. ONLY 4.8g complete with crystal and designed to operate between 3 and 5v. Example: 1 Li-poly cell directly connected for gliders, or through the Falcon single cell ESC for powered models. Alternatively for 2 Li-poly cells, through the 5v BEC function of an ESC. 120metres range on only a 20cm (8") Rx aerial. The aerial can be extended for greater range.

Dimensions: length 36mm - width 24mm - height 10mm - Convert your freeflight models to R/C and fly in your garden! or indoors.This includes rubber and C02 powered Falcon Breeze Block now with DSP & Fail Safe

This unit isw on 35 mhz, but we can obtain 72 mhz Breeze Blocks for customers overseas to special order only.

If over seas email for details.


£49.99 Each


Privacy statement Terms & conditions © Steve Webb Models Limited 2017. Postage & packing Contact us